v10.2.43 (2025-02-07)

Function added

• EasyGo screen operation rate clipboard output function.

Bugs fixed

• The text in the animation station showing the number of parts is difficult to read.
• Transport time is not updated for transporter with default speed on the EasyGo screen.
• Transport information of a transporter with default speed is not displayed on the EasyGo screen.
• The EasyGo screen may not set the transport time correctly.
• The floor size unit is not applied to the transport time on the EasyGo screen.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.

v10.2.42 (2024-11-08)

Function added / changed

• Adjust the default display size and scroll range of the EasyGo screen.

Bugs fixed

• Incorrect Production Order is created when deleting and adding a production plan in the Production Rendering screen.
• Agent Designer screen operation may cause errors when screen resolution is other than 100%.
• Agent Designer screen may not display the last row of the bidirectional passage table.
• Rendering may not proceed if there is worker uptime across dates.
• Update of route-fixed Transport Activity by clipboard may cause error when the dotted line from Transport point of Station to route is not displayed.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.

v10.2.41 (2024-06-28)

Bugs fixed

• The animation of the simulation results does not correctly display the worker executing the activity.
• Functional unit information may be duplicated on the Agent Designer screen.
• In certain cases, information on transport activity is not output to the clipboard.

Restrictions

• Projects containing modules cannot be opened in this version
• Defect rate is a feature of station activity to be supported in a future version and is not available in this version
• If you keep the Portal page open for a long time, you may get an error on startup. In this case, please log in again at the Portal page.

v10.2.40 (2024-05-31)

Bugs fixed

• The application freeze when the Agent Designer screen is displayed.
• An error may occur when a large number of products are registered in the product master at once.
• Error logs may not be saved if their size is large.
• Transfer activities may be duplicated and output to the clipboard.

Functional Improvements

• Improved confusing error messages when updating product master.
• Speeds up the process of copying all element work in the bulk setting screen.
• Improved performance of animations by speeding up the search process for animation data.

Restrictions

• Projects containing modules cannot be opened in this version
• Defect rate is a feature of station activity to be supported in a future version and is not available in this version
• If you keep the Portal page open for a long time, you may get an error on startup. In this case, please log in again at the Portal page.

v10.2.39 (2024-04-05)

Function added / changed

• When multiple products are produced in a single production process, it is now possible to set the process parameters for each product in Bulk Settings.
• Cycle time
• I/O part information
• Initial inventory
• Information for fixed route transport activity can now be set in Bulk Settings.

• Improved scroll position control,in the following screens. This has improved the operability of each screens.
• Station Activity Screen
• Transport Activity Screen
• Static Transport Activity Screen

• You can now choose to retain simulation results. This reduces the load on the PC during the modeling process.
• Improved display function of Station Attribute Screen. Screen responsiveness has been improved, especially when working with large models.
• Improved screen transition from the main screen to the Production Rendering Screen.
• Added error checking before performing production rendering.

Bugs fixed

• Failure to execute animation.
• Failure to register a large number of products in Bulk Settings.
• Failure to delete fixed route transport activity.
• Bug in Agent Designer Screen when switching agents.
• Failure to display flow of worker assets on Material Flow Chart.
• Failure to reflect changes in speed limits for routes.
• When there are many lines on Production Rendering Screen, scrolling the screen clears the input station selection menu.
• Worker icon display size did not change when grid size was changed.
• Automatic compressed display even though the number of process in the display is less than 1000.
• Failure to update worker assignments for transport activities in Bulk Settings.
• Failure to change the name of an process, causing another process name to be changed.
• Product menu on Station Activity Screen was cleared by scrolling the screen.
• Unable to change product menu item on Station Activity Screen.
• Multiple products cannot be registered at once.
• Duplicating a production process that produces multiple products causes connection errors in production process.
• Work element connections may be broken or production process may be created with incorrect connections.
• Bulk Settings cannot be made for circulating production process.
• Adding a new uptime group master and inserting it between the rows of an existing group will remove the worker assignments for the activity.
• Failure to sort data in the Transport Activity Screen.
• Failure to distinguish between workers with the same name belonging to different groups.
• Incorrect association of Production Process and products by Bulk Settings.
• In the Agent Designer Screen, the port displayed on the functional unit is incorrect.
• Automatic compressed display even though the number of displayed process is small.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.

v10.2.38 (2023-11-28)

Bugs fixed

• Merging nodes results in Production Rendering error when routes are configured in Agent Designer.
• Selection screen is not displayed even when adding an agent from Agent Designer.
• Unused Transport Activities may remain even if the association is deleted.
• Production Rendering result that should be judged as "1" may become a value like 0.9899998.
• In Production Rendering, if a non-working time occurs while waiting for an activity to run, the activity does not resume when working time returns.
• If you try to set the transport quantity when the transport information for fixed route transport is missing, it will crash.
• Bug when deleting unnecessary transport route in Transport Activity.
• Tooling Activity display error.
• In production process duplication (stations are also duplicated), the duplicated transport point becomes the same as the original ID.
• Problem when setting color to Cyan in station setting.
• When adding a child group in the Working Hour Group settings, the station activity worker changes from the parent group to the child group.
• Information is not displayed when hovering over AdvancedAGV asset flow in Material Flow.
• If you assign the parent group of Agent to the Transport Activity, an error will occur during Production Rendering.
• Even if you set a speed limit slower than the traveling speed for an arc, the speed will not be limited during Production Rendering.
• After adding fixed route transportation, if you delete some of the existing routes and perform Production Rendering without saving the project, an error will be displayed.
• After starting GD.findi, if you change the screen display size, the right edge of the material flow is cut off.
• Worker information is not displayed when mouse is on in Material Flow.
• Input problem of asynchronous conveyor functional unit in Agent.
• After associating Production Process and Product in Bulk Settings, the app crashes when you press the "apply" button.
• Bug regarding production parameter display in EasyGo.
• Bug when deleting unnecessary transport route in Transport Activity.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.37 (2023-09-19)

Function added / changed

• Port nodes are now redrawn.

Bugs fixed

• Status bar time display is different when mouse is on in Material Flow.
• Incorrect display when hovering over asset flow in Material Flow.
• Issues with unit changes in Floor Plan.
• Incorrect display of arc length after unit conversion in Floor Plan.
• GD.findi MS hangs when trying to duplicate (also duplicate the association) a production process that is connected to a different production process.
• Problem setting data via clipboard in Station Activity.
• After editing the initial stock of the station in batch settings, the display of the batch screen does not change.
• Updating the ProductionProcess tab in batch settings breaks the connection between different production processes.
• Broken Station Activity screen.
• Part id reverts to default when increasing the number of products assigned to the production process in individual product settings.
• The unit of distance on the Transport Route setting screen after unit conversion is different in the floor plan.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.35 (2023-06-23)

Function added / changed

• Added m/s to arc speed limit input unit.
• You can now import and export multiple production plans in Bulk Settings.
• Multiple projects can now be deleted at the same time.
• You can now enter decimal places for fixed route transport and processing time.
• Added floor plan units to summary file.

Bugs fixed

• Problems with input from multiple modules.
• Production Rendering error when merging nodes if route is set in Agent Designer.
• Asset tooltips, working status not matching animations in Material Flow Chart.
• Product Individual settings, fixed to keep scroll position after input.
• Exception occurred when editing working time group.
• An error occurs when setting a functional unit to a Transport Point mapped to a node.
• Production Rendering error after deleting node.
• The problem that the input/output parts of the asynchronous conveyor are not conveyed correctly when setting multiple input/output parts.
• Issue with not transporting when Port and Node are close together.
• Fixed an issue where the same Tooling was set twice in the Station's initial Tooling, and an invalid state was defined.
• Error due to incorrect data of initial inventory.
• Fixed to assign workers to child group when adding child to working time group.
• When resizing the floor, the scale of the Floor Plan pane is different the first time and the second time.
• After Production Rendering, the animation display position shifts when scaling down in Floor Plan panee.
• An error occurred when duplicating the Production Process including Production Process dialog and Individual Product settings.
• Bug when changing Agent Model.
• Connect Process between different Production Processes, Station Activity disappears when Project is saved.
• Problem that the next node can be added outside the layout.
• Layout resize moves Stations and leaves Ports behind.
• An exception occurs when replacing all and updating on the ProductionProcess tab of the Bulk Setting screen.
• Bug in AGV_unscheduled.
• Problem that an error occurs or the Project is in an invalid state when the dialog is opened in Individual Product settings.
• The problem that the numerical display of the inventory number and the Material Flow display of the delivered goods of AdvancedAGV were not displayed correctly.
• Problem that additional information saved with another application disappears when saved with GD.findi MS.
• The problem that it crashes when pasting an image and changing the floor resolution.
• AGV_Scheduled is traveling in the opposite direction of the route.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.32 (2023-04-12)

Bugs fixed

• Asset may not return after break.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.30 (2023-03-15)

Function added / changed

• Floor Plan pane right-click menu "Scale Zoom In/Soom Out" renamed to "Floor Resolution (Large) (Small)".

Bugs fixed

• Nodes are merged when placed in neighboring cells.
• If the number of incoming output parts in the front-end process and the back-end process are different, batch setting will result in the same number of parts.
• Moved nodes may go outside of the floor when the Floor Plan pane is set to align with the grid.
• When a station is created in the floor plan pane and set to fit the grid, the position and size of the station does not match the grid.
• When the Floor Plan pane is set to align with the grid, the position of the arc is shifted when the moved nodes overlap.
• Switching projects while editing cells in Agent Designer may cause an error.
• The first production plan is selected when the rendering mode is changed in the Rendering Settings screen.
• Saving the Project as a different name may change the Rendering result.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.29 (2023-02-20)

Function added / changed

• Floor size unit change function of Floor plan pane.
• Function to specify grid size for floor plan pane
• Function for setting the display size of text, etc. in the floor plan pane.
• Function to align the drag position of a station or other object in a floor plan pane with the grid.
• Bulk Settings Screen functions to set the input/output parts/products of the Process.
• Function to define two-way routes for AdvanedAGV

Bugs fixed

• Resizing a station by mouse dragging in the Floor Plan pane resizes it to an integer multiple of the unit.
• The agent name is output to "$$Work Load Chart of PlugInAgent" in the statistics file.
• AdvancedAGV passes through on the same path in a model with multiple vehicles working on it.
• The worker designating the route or the towing vehicle performs work outside the scope of coverage.
• Rendering of models with Production Processes containing multiple branches is slow.
• Error in Transport Activity takeover operation.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.28 (2023-01-30)

Bugs fixed

• Unable to clear the value of speed limit in the Arc Attribute dialog
• Error during animation in certain project files
• In the material flowchart, selecting an asset does not display the chart
• In the Production Rendering screen, the definition of stations in the feeding order disappears when scrolling
• In AdvancedAGV, the inventory value and material flow display for transported goods are not displayed correctly.

Restrictions

• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.27 (2022-12-27)

Function added / changed

• In the Detail Properties, the space between input fields is now allowed.
• Behavior input columns on the activity screen can now be displayed wrapped by column width.
• Multiple layouts can now be overlaid on top of each other.
• e additional export format for result files has been added.
• AGV agent for charging function added.

Bugs fixed

• When creating a new project, after specifying parameters and saving, an error occurs when returning with the [←] button without entering a name.
• When saving a model, an error may occur and the model cannot be saved.
• The resolution may be coarser than set in some cases.
• Error occurs when duplicating a production process (associated with a station) in an existing project (without specifying a conveyance activity).

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.26 (2022-11-29)

Function added / changed

• In the Process Attribute screen, the Tab key has been improved for moving when inputting parts.
(Press Tab key to move right, Shift + Tab key to move left)

Bugs fixed

• In the floor plan pane, the port orientation may not be correct.
• In Agent Designer, the functional unit type was blank.
• In projects that include AGV_Unscheduled agents, an error occurs when checking assets in the Material Flow Chart.
• In the Asset Allocation dialog, selecting a parent uptime group is not reflected in Production Rendering.
• Error occurs when duplicating a project that contains tooling activity.
• Highlighting of station activity was unusually slow.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.25 (2022-10-31)

Function added / changed

• Function to save animation videos to file
• In the Station Attributes dialog, initial inventory and buffer size can be specified for each intermediate Product part.
• Display of coordinates and scaling on the Production Process pane
• Display confirmation dialog when canceling Rendering
• Allow dialogs to be moved off-screen

Bugs fixed

• In the Production Process dialog, the application fails when clicking on the header of the table.
• In the Production Process dialog, the app fails when right-clicking on a blank field and deleting it from the right-click menu.
• Duplicate records are not added when updating clipboard text on the Station Activity screen.
• Clipboard Output/Update Production Plan menu is enabled while Rendering is running
• Part Name is not automatically updated in the Process Attributes dialog.
• Cannot change Process name in Bulk Settings
• Unintentional addition of a node in the floor pane
• Negative values can be entered for layout size
• Clipboard update in Station activity does not update correctly when behavior contains tab character.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.24 (2022-10-06)

Function added / changed

• In the Activity Screen, when an activity is added, the screen does not scroll.
• In Agent Designer, adjusted the default column width of the agent list to the extent that the horizontal scroll bar is not displayed.
• Specify the display ratio of the background image with the spin button and reflect it in real time.
• Provide shortcuts for display switching in the Production Cockpit.
• Right-click menu icon in the Production Process dialog
• In the Operating Time Group Master screen, the initial value for the start time is set to the previous end time plus one minute.
• Improved response of piling function
• In Bulk Settings, when updating clipboard text, lines with errors (first line only) are displayed.
• In the Production Process dialog, when a Production Process with 10 or more Processes is copied (Process only), the Production and Process List in the Process Pane is now displayed.
• Changed the specification to not change the parent element assigned when adding a child in the operating hours group.

Bugs fixed

• In the StationActivity Screen, the Behavior and Activation fields allow the input of strings that contain line breaks.
• In Agent Designer, buttons are hidden when dialog width is narrowed
• During animation, the icon of the parts are displayed in a position out of station.
• Station Activity Bulk Settings are not updating station association highlights after updating on the clipboard.
• In the Station Attributes dialog, the dialog can be closed even if there is an input error.
• When you select a Process with "Select the relevant element work from here" and drag the Process with the mouse, only the first Process is moved by a large amount.
• In the Production Process dialog, changing the Production Process name is not reflected in the Process tooltip.
• In the Production Cockpit, when Zoom in, the production volume curve is not displayed correctly.
• In the Production Cockpit, the cursor at the drawing position returns to the position before moving.
• Displays a moving average of worker utilization rates in the Production Cockpit.
• In the piling function, each product is not unchecked even if the check boxes for all products are unchecked.
• In the pile function, the app fails in the Production Process flow-only project.
• In the pile function, an error occurs when the same Product is connected to multiple Production Processes.
• In the Process Attributes dialog, app fails when adding Output parts
• Error occurs when group name is left blank and confirmed in the Operating Hours Group dialog.
• When a Process in a Production Process with multiple Products is deleted, only the name remains.
• In Activity Screen, Bulk Settings of clipboard text is not updated correctly.
• Background image not shared
• In the Station activity, switching products will restore the selection in the drop-down list.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.23 (2022-09-22)

Function added / changed

• Added "Output All Information to Clipboard Text" to the Clipboard Text menu in Activity Screen.
• Along with the above, modified to allow updating from clipboard with all information.
• Added "Delete in Clipboard Text" to the Clipboard Text menu in Activity Screen.

Bugs fixed

• Bugs related to data updating, such as Process disconnecting during total replacement.
• In the clipboard update of the Station Activity screen, it is possible to set a value higher than 100 for the defect rate.
• Decimals cannot be set for the defect rate in the clipboard update on the Station Activity screen.
• In the clipboard update of the Station Activity screen, it is possible to set a decimal point value at the work position.
• In the Station Activity screen, Tooling Activity cannot be updated using the clipboard.
• In Transport Activity clipboard update, it is possible to set a negative value for Transport time.
• In the Product Individual Settings screen, the value returns to 1 after changing the quantity.
• In the Production Rendering screen, when outputting to clipboard text, lines with zero Production Goals are not output.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.22 (2022-09-15)

Function added / changed

• Production Process copy function
• Floor plan process piling display function
• Function to edit hyperlinks in Process
• Function to output/update activity via clipboard text
• Function to output/update production plans via clipboard text in the Production Rendering screen.
• When the window size is smaller than the recommended window size (1280x720px, 100% magnification), a warning message is displayed in a dialog box.
• Changed dialog creation to fit within the display area when the window size is exceeded.
• Changed specification to add default Agent when opening Agent Designer instead of adding Agent when creating a new project.
• Disabled pan and zoom functions in the Production Cockpit.
• Animation displays node and station information in the lower right corner of the floor plan when the cursor is over it.
• In the Activity Screen, the display position is fixed to the set position after the assignment is performed.
• Modification to make Station text (green) easier to read.
• In the Agent Designer pull-down list, the list now opens even if clicked on a non-string item.
• In the Material Flow Chart, set the background color during non-operating hours (during breaks).
• Added "Move Up" and "Move Down" to the right-click menu on the Operating Hours Group screen.
• Changed the display specification of Product in the ProductionProcess tab of the Bulk Settings.

Bugs fixed

• Editing the Transport behavior changes the line height and causes the display to overflow.
• In the Transport Activity panel, unchecking the Transport Usage checkbox will stop the yellow arrows from displaying.
• In EasyGo, animation is not displayed when Rendering is executed immediately after Project loading.
• In EasyGo, results are not reflected in Material Flow after execution.
• In EasyGo, the app fails when performing Production Rendering of a project without a station.
• ProductionCockpit display is incorrect just after running EasyGo
• Slow screen display processing when moving Bulk Settings Screen
• Batch updating of Process time is not possible in the Bulk Settings.
• In Bulk Settings, update cannot be performed after all replacements have been made.
• In BulkSettings, an error occurs when adding a StationActivity in succession
• In the Production Cockpit, the application falls down when the slide bar is moved.
• Failure to operate assignments to operating time groups
• In the floor pane, the line segment displayed when hovering the mouse over the Transport Activity is incorrect.
• In Agent Designer, asynchronous conveyor does not work correctly when Rendering is performed with AGV_scheduled added.
• In the Product Individual Settings, the program fails when the part ID is changed.
• Deleting the Output parts of Process causes the app to fail.
• In the Project List screen, when right-clicking near a cell boundary, Delete is not displayed in the menu.
• On the Station Attributes screen, the app fails when the overall buffer size is entered.
• In floorpane, merging nodes together may leave arcs.
• When the Production Process dialog is open, adding and deleting Production Processes is not reflected.
• In Process Attribute Screen, selected rows and selected cells of Output parts are out of alignment.
• In the Production Process dialog, the scroll position changes when duplicating/deleting.
• In the Asset Allocation dialog, the Update/Cancel button is not displayed when there are many group members.
• Reducing the height of the Activity Screen prevents scrolling to the bottom of the Station activity.
• In Material Flow Chart, vertical axis is shifted between Station and Gantt Chart.
• In the Material Flow Chart, the display time of the asset flow is shifted.
• Agent models are sometimes blank in Agent Designer.
• Tooling initial status is not displayed on the Station Attributes screen for a station associated with multiple Processes.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.21 (2022-08-03)

Function added / changed

• Improved response to opening the Assignment panel in the Activity Screen.
• Improved the behavior of range selection when a range is selected in the floor pane.
• Added "New Forward" and "New Backward" to right-click menu of Process.
• Improved layout of login screen.

Bugs fixed

• Bulk Settings: In the Placement tab, if there is a facility with an Operating Hours group of "Default", it cannot be updated.
• Bulk Settings: In the Placement tab, when deleting a selected row, the first row is deleted.
• Bulk Settings: Added error check in the Placement tab when the clipboard content is not text.
• Bulk Settings: Cannot update the Placement tab to empty the Operating Hours group.
• In Bulk Settings, with no rows, the right-click menu does not disappear and deletion can be selected.
• Deleting a station in the floor pane while displaying the Station Activity dialog causes a forced termination.
• Bug in displaying the size of a station when mousing over it in the floor pane.
• In the floor pane, the Grid Line does not disappear.
• Activity Screen is grayed out when closing other dialogs with the Assignment panel open.
• If a node is specified as a transit point for a route-fixed Transport Activity, the nodes can be merged.
• In the Fixed Route Transport Activity, if a non-numeric value is entered while editing a quantity or time cell, the input value is changed.
• In the fixed route Transport Activity, when editing a quantity or time cell, changing the time that has already been set causes a force close.
• In Transport Activity, when Transport Time is set, it cannot be changed to blank.
• Force Quit with the right-click menu on the Production Process screen.
• On the Station Attributes screen, if a hyphen is entered in the station name, the screen will not close.
• Failure to display input errors in input/output buffers on the Station Attribute screen
• When a hyphen is entered for the part ID on the Process Attribute Screen, the screen cannot be closed.
• In Process Attribute Screen, when the number of parts from multiple Processes is large, scrolling is forced to terminate.
• When changing the production time for each part in Product Individual Settings, a warning message appears and rendering fails.
• In the touring master, once the name is the same, changing it to another name does not remove the error.
• Dialog size cannot be restored once it is expanded outside of the window area.
• When the project name is changed in the project list screen, pressing the enter key may cause a force close.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.20 (2022-07-25)

Bugs fixed

• In the Station Activity screen, the Product combo box may become empty when the scroll bar is moved.
• Production Cockpit sometimes freezes or crashes when moving the slider.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.18 (2022-06-30)

Function added / changed

• Bulk Settings (Production Process, Floor Plan) added.
• Bulk Settings function is now activated from the Details button in Bulk Settings.
• Production Cockpit to display moving averages instead of instantaneous values for occupancy rates.
• After Rendering, Production Cockpit screen position is changed to the lower right corner of the window.
• Correction to insert below the selected line when adding a Transport point.
• Resize login dialog.

Bugs fixed

• Worker behaviors in Project created in GD.findi M&S (Silverlight version) are not displayed correctly in GD.findi MS (UWP version)
• Material Flow inactivity and availability are displayed differently in GD.findi M&S (Silverlight version) and GD.findi MS (UWP version)
• In Agent Designer, scrolling through functional units causes values to disappear and popups to appear.
• In Agent Designer, all parameters for functional units disappear.
• During animation, Station display color does not change according to operating status.
• In the Material Flow Chart, when the order of stations is changed by dragging, they are replaced instead of inserted.
• Material Flow Chart may not show maintenance.
• During Production Rendering, it is possible to re-run the rendering.
• Error when exporting part log file during Production Rendering.
• Application terminates when processes are concatenated.
• In Bulk Settings, an error occurs when importing directly after exporting.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.17 (2022-05-31)

Function added

• When adding a tooling asset to the master, the initial value is changed from 0 to 1.
• Ability to represent component mounting and dismounting operations

Bugs fixed

• In the login dialog, it is not straightforward to understand the note for cloud users.
• In the Floor Plan pane, the grid size changes when the grid is redisplayed.
• Under certain conditions, multiple drag selections in the Production Process were not possible.
• Force close occurs when Production Process is selected under certain conditions.
• When using prohibited characters in the Process Attributes dialog, the background does not turn red, but the dialog may not be closed.
• In Agent Designer, overwrite save fails when deleting an unnamed worker
• In Agent Designer, multiple lines can be entered in a property.
• In Fixed Route Transport Activity, the activity is forced to terminate while setting the transport route.
• In the master of the operating hours group, it is not possible to input the number of days in the holiday calendar.
• Added background color to Dayoff display in Material Flow Chart.
• Failure of Lot function in Production Rendering
• Different Product names displayed in Material Flow Chart due to multiple Product registrations
• In the Rendering settings, the display start time can be set later than the rendering period.
• Error during rendering when agent is disabled in rendering settings.
• Messages are not copied to the clipboard correctly when there is a Rendering Error.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.16 (2022-05-16)

Bugs fixed

• The input part quantity cannot be changed on the Product Individual Settings screen.
• Cannot change properties and frequency work on the Product Individual Settings screen.
• On the Product Individual Settings screen, after entering and saving the Process time, when the saved file is reopened, the entered information is lost.
• In the Product Individual Settings screen, the part ID, quantity, and name may not be changed.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.15 (2022-04-28)

Function added

• Multiple selection, movement, and deletion of Production Processes
• Ability to configure selection condition setting agents on Agent Designer.

Bugs fixed

• In the project list, double-click the topmost project to edit it without opening it.
• In the project list, the name of the opened project (project with green text) can be edited.
• When creating a new project, Transport Activity and Station Activity are not displayed in the list.
• Error when importing Production Process in the Bulk Settings Preset screen.
• After updating station colors with RGB values in Bulk Settings Screen, an error may occur when opening the Station Attributes screen.
• When adding rows using the import function in the Bulk Settings Preset screen, non-editable items can be updated.
• In the parameter setting screen of Agent Designer, when a functional unit is set up, the functional unit cannot be added after updating the pulldown.
• In Transport Activity, when adding an activity, the checkbox is not checked.
• Bug in pull-down display when adding an activity in Transport Activity
• In the Production Rendering screen, the display frame for the Product and Station names in the Production Order is narrow.
• Material Flow Chart and Production Cockpit, when a time other than the default setting is set for the Operating Time Group.
• In the Material Flow Chart, when the display start time is not zero, the drawing of the asset flow is out of alignment.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.14 (2022-04-18)

Bugs fixed

• When more than 20 products are added, the second and later pages of the Production Goal on the Production Rendering screen are not displayed.
• Authentication error may occur at startup.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.13 (2022-03-28)

Bugs fixed

• Errors may occur when operating Function Unit in Agent Designer.
• Errors may occur when connecting processes in the Production Process pane.
• Error may occur when saving a new Project.
• Clicking the close button in the upper right corner of the screen does not exit.
• Error may occur when changing part ID or quantity in Product Individual Settings.
• Error occurs after removing Station and then Rendering and moving the slide bar in the Production Cockpit.
• When a Production Process is deleted, the associated Transport Activity is not properly deleted.
• Merging and deleting nodes in a Floor Plan pane may cause an error.
• When changing values on the Station Attribute screen, they may not be reflected.
• Pressing the Enter key in the Transport Time column of the Transport Activity results in a new line without confirming the value.
• No animation of transport item on asynchronous conveyor.
• Production Cockpit end time sometimes incorrect.
• The color of the lines in the Material Flow Chart is dark and difficult to see.
• When Material Flow is displayed for a selected Process, the Material Flow for the unselected Process is also displayed.
• If a Production Order for a Product that has not been assigned to a Production Process remains, an error occurs during rendering.
• A save confirmation dialog box appears when closing the Project, even if the Project is not edited.
• When changing Product in Production Order, the Station list in the pull-down menu is not updated.
• In Transport Activity Assignment, when a behavior is changed in Worker Assignment, the change is not reflected.
• When a lot is specified in the Production Order, the production number may not reach the target number.
• Off line set up may not be displayed correctly on Material Flow Chart.
• When deleting a worker, it is not removed from the Assignment of the tooling activity.
• When Part Name is changed, the name of the same part in other Production Processes does not change.
• Agent Designer screen does not scroll vertically when enlarged.
• Right-click menu "Add Activity" on Transport Activity to make the display a single line.
• Product settings in Station Activity may be reflected in Transport Activity.
• Data may not be displayed when switching Production Process in Transport Activity.
• Error may occur when operating combo box of Function Unit in Agent Designer.
• Rows may not be added to the loading/unloading operation table of Function Unit in Agent Designer.
• The type of Function Unit in Agent Designer may change unintentionally.
• Copying and importing a Production Process in Bulk Settings causes an error.
• On saving, products not associated with Production Process are deleted.
• Worker performs route-fixed transport when agent is disabled in Rendering mode.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.12 (2022-03-08)

Bugs fixed

• On line set up may not be displayed correctly in Material Flow.
• Material Flow incorrectly shows occupancy rate when display start time is changed.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.11 (2022-02-25)

Bugs fixed

• Repeated rendering of the same Project may increase the rendering time.
• When opening the Agent Designer, an error occurs if the unit Properties is empty.
• Agent Designer does not scroll vertically when the screen is large.
• Transport is delayed when Lot is specified in Production Order.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.9 (2022-02-15)

Bugs fixed

• Repeated rendering of the same Project may increase the rendering time.
• In Material Flow Chart, Production Process in which parts are merged is not displayed properly.
• Station is not transparent when setting the display color to Transparent.
• When opening the Agent Designer, an error occurs if the unit Properties is empty.
• Value disappears when scrolling down a functional unit in Agent Designer.
• An error sometimes occurs when operating functional units in Agent Designer.
• Production Process display changes from hidden to expanded when layout information is updated in Bulk Settings.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.8 (2022-02-04)

Function added

• A toggle button has been added to the Rendering Settings screen to specify only the beginning of each lot.

Bugs fixed

• Cannot enter a decimal point in Dispersion in Station Activity.
• An error may occur during slide bar operation in Production Cockpit.
• Products that are not at the head of the input lot are displayed on the Material Flow Chart.
• Clicking the Execute Production Rendering Button during Rendering will result in an error.
• In the Process Attribute Screen, clicking on a Part Name may cause an error.
• In the Transport Activity screen, opening and closing the Transport Activity's Assets Assignments Screen will cause all Assignments to be temporarily hidden.
• Default size of Working Operation Screen in Fixed Route Transport Activity is too small.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.7 (2022-02-04)

Bugs fixed

• Cannot enter a decimal point in Dispersion in Station Activity.
• An error may occur during slide bar operation in Production Cockpit.
• Products that are not at the head of the input lot are displayed on the Material Flow Chart.
• Clicking the Execute Production Rendering Button during Rendering will result in an error.
• In the Process Attribute Screen, clicking on a Part Name may cause an error.
• In the Transport Activity screen, opening and closing the Transport Activity's Assets Assignments Screen will cause all Assignments to be temporarily hidden.
• Default size of Working Operation Screen in Fixed Route Transport Activity is too small.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.6 (2022-02-01)

Function added

• Improved performance when the number of lines displayed in the dialog is large.
• Improved input handling in dialogs. (forbidden characters, ✕ button, copy/paste)
• Added function to highlight items in the Floor Plan pane when they are selected in Transport Activity and Agent Designer.
• Grid lines can now be toggled between visible and invisible in the Floor Plan pane.
• In Material Flow, you can now use the right-click menu to initialize the order of Material Flow and hide it.

Bugs fixed

• Settings are not displayed correctly when scrolling in Activity Screen.
• Changing the Number of Workers in the Assets Assignments Screen may not be reflected.
• In the Bulk Settings Screen, the number of items displayed when filtering may be incorrect.
• The values entered in Product Individual Settings may not be reflected correctly.
• If the icon acquisition fails due to network failure, the Project list will not be displayed.
• When the Production Process is deleted, some information may remain in the Project.
• Selection in Material Flow may not be highlighted correctly in the pane.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.5 (2021-12-27)

Bugs fixed

• Change output parts of process with Product Indivisual setting may cause an error.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.4 (2021-12-24)

Function added

• Add filter dialog to Bulk Settings dialog.

Bugs fixed

• Project may not be saved correctly.
• On Project List, right-clicking on a table header may cause an error.
• AGV may not move properly after unloading in fixed-route transport.
• Text size of Annotation is different from v4.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.3 (2021-12-20)

Bugs fixed

• On Production Cockpit dialog, Step forward skips parts log.
• Transport activity data exported at Bulk Settings dialog is not correct.
• Moving the vertical scroll bar of the dialog may cause an error.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.2 (2021-12-13)

Function added

• Add Sorting and filtering functions to the Project List screen.
• Add Product Indivisual Settings dialog.
• Improved display of Floor Plan pane when zooming in/out.
• Specify on-premise server on startup.

Bugs fixed

• Error occurs when moving the slide bar on Production Cockpit dialog.
• Slow Material Flow screen operation.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.2.0 (2021-12-06)

Function added

• Improved screen layout and text size of screen.
• On Station Activity screen, Show/Hide toggle checkbox of Tooling Activity have been replaced with "+" and "-" buttons.

Bugs fixed

• Changes of Transport Activity not take effect immediately.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.

v10.1.26 (2021-12-15)

Bugs fixed

• Display error details when service initialization fails.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Transport time as input at Transport Activity is not visible at rendering animation.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• Sum of the parts as calculated at stations and toolings may not be accurate, when it is rendered for animation.

v10.1.25 (2021-12-07)

Bugs fixed

• Error occurs when moving the slide bar on Production Cockpit dialog.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Transport time as input at Transport Activity is not visible at rendering animation.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library. Please click Update button on Project List screen.
• Sum of the parts as calculated at stations and toolings may not be accurate, when it is rendered for animation.

v10.1.23 (2021-11-12)

Function added

• On-premise server link is now easy to change.
• New function is added to display the rate of magnification at the floorplan and production process.
• Process attributes now displays the name of process and related work elements in title.
• Bulk setting is now able to add further sub-elements of the Production Schedules.

Bugs fixed

• Unknown error at the rendering of projects.
• Unknown error at the setup panel of Parameter at Agent Designer.
• Error that Agent Designer’s Function Unit does not show all the selected ports.
• Unknown error at the display of material flow.
Other minor bugs also have been fixed.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Transport time as input at Transport Activity is not visible at rendering animation.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library.
• Sum of the parts as calculated at stations and toolings may not be accurate, when it is rendered for animation.

v10.1.22 (2021-09-17)

Function added

• New function buttons are added to Open and Update at the project list.
• On-premise server is now possible to select when installing the software.

Bugs fixed

• Error that the name of work element is not displayed at process pane when the dark mode.
• Error that appears, when the start time and the end time overlaps to each other in the setup panel of Working Group Master
• Error of not displaying all the setup tables of Parameter at Agent Designer
Other minor bugs also have been fixed.

Restrictions

• This version cannot make a station smaller than 1m.
• This version cannot open a project which is made using the function of modules.
• Fault rate is not yet available at Station Activity – to be implemented at the future version.
• Portal page may cause an unknown error at the startup of GD.findi, when the page is kept open for long period. Re-login to Portal page is necessary to solve the error.
• Transport time as input at Transport Activity is not visible at rendering animation.
• Update that is made at GD.findi M&S v4 is not available automatically unless saved at the project library.
• Sum of the parts as calculated at stations and toolings may not be accurate, when it is rendered for animation.

v10.1.21 (2021-08-27)

Bug fixed

• An error occurred when deleting the final process in the production process pane.

v10.1.20 (2021-08-23)

Bug fixed

• An error occurred when deleting an arc in a project where the agents are registered.
• An error occurred when deleting an agent.
• Could not connect to a new production process after the production process flow has been broken up.

v10.1.19 (2021-08-16)

Function added

• Two types of default preset are added in Bulk Settings.

Bugs fixed

v10.1.18 (2021-08-02)

Bugs fixed

v10.1.17 (2021-07-21)

Function added

• Fixed route transportation
• Animation display function (shortage corrected)
• Parts transportation status
• Improvement of station operating status and parts quantity display
• Bulk settings (additional features added)
• Preset saving function
• Row-by-row editing
• Import and export function

v10.1.16 (2021-06-18)

Bugs fixed

v10.1.15 (2021-06-10)

Function added

• If no products and production targets are specified in a project, the default values will be set automatically when rendering.
• If the project has incorrect parameters, an error message will display when rendering.
• If the final process is not specified in the production process, it will automatically be checked when rendering.

Bugs fixed

• An error occurred when assigning an agent from WorkerWithPassage model to the fixed-route transport activity.
• In the production process pane, the arrangement of work elements may differ from Version 4.5.
• Buttons could not be displayed in the asset assignment panel.
• Transport activity remained in the activity panel even though the station activity was deleted.
• When adding annotations after changing the display magnification in the Floor Plan, the display location of the annotation was incorrect.
• The working hour group's structure could not be saved correctly.
• When the work element of the final process has multiple back-end work elements, the same number of parts in "Process:Local Out" was displayed in the process attributes panel.
• Could not save an overwritten project.
• In the working hour group settings panel, an error occurred when right-clicking under the working hour group.
• In the process attribute panel, if you added a part and then re-open the panel, the number of parts increased.

v10.1.14 (2021-05-27)

Functions added

• You can move the viewpoint of the Floor Plan pane and Production Process pane by dragging the mouse cursor while holding on to the Shift key.
• You can create the stations by dragging the mouse cursor on the Floor Plan pane.
• You can associate work elements and stations by dragging and dropping the mouse cursor while holding on to the A key.

Change in specifications

• Splash screen

Bug fixed

• The location of the transport point could not be specified in detail.
• In the floor plan pane, the position of the pathway arc was created incorrectly.
• Unable to overwrite a project.
• In the Production Rendering panel, an error occurred when clicking the right arrow in the Production order setting panel for a specific project.
• In the Production Rendering panel, when clicking the advance arrow, it did not advance to the last page for both the Production target and Production order setting panel.
• Unable to scroll across working hour groups setups in the Working hour group master panel.
• In the working hour group master setting panel, it was possible to create a new group even when an error was occurring.
• In the activity setting panel, the checkbox for activating the transport activity could not be removed.
• A part of the created projects was lost when opening them with GD.findi M&S Version 4.5.
• The input date was changed to an invalid value when changing the input order in the Production Rendering panel.